Application-Based Selection
Check the model drawings and terminal configuration against your equipment before integrating the switch.
PRODUCT LINE / CUSTOM SOLUTIONS / TECHNICAL SUPPORT
OEM & Custom Solutions
Explore product specifications, application requirements and customization options for your equipment.
FOR OEMS / REF 29
Ignition Switch
Suitable for starter ignition operation of internal combustion engines and agricultural machinery
- Application-based electrical specification review
- Electrical and mechanical compatibility
- Technical discussion for OEM requirements
- Sample evaluation and bulk sourcing coordination
Industrial Switch Specifications
Confirm the circuit ratings, switch positions, mounting dimensions and terminal connections for your application.
Ignition Switch
- Ratings
- 20 A at 12 V DC / 10 A at 24 V DC / 2 A at 96 V DC
- Connector
- AMP socket
Features
- Nut mounting
- Metal housing (with rubber protective boot)
- Complies with QC/T 198-2014 / EN 60947-5-1 requirements
| Connection Type | AMP connector socket | Mounting Method | Panel mount |
|---|---|---|---|
| Positions | 2-position | Ratings | 20 A @ 12 VDC, 10 A @ 24 VDC, 2 A @ 96 VDC |
| Stationary Contacts | Silver | Moving Contacts | Silver |
| Cover Material | Nylon | Base Material | Nylon |
| Electrical Life | 50,000 cycles | Operating Temperature | -50°C to +85°C |
| Mechanical Life | 100,000 cycles | Contact Resistance | < 25 mΩ |
| Protection Rating | IP54 (excluding connector) |
Usage Notes
- (1) Key insertion force: 18 N
- (2) Key operating torque between OFF and ON positions: 0.2–0.39 N·m
- (3) Mounting torque (M22 nut): 8 N·m (max)
- Do not allow debris or oil to contaminate the connector socket. In addition, the external AMP connector plug must be fully inserted; otherwise, poor terminal contact may occur.
Please refer to the technical datasheet for the exact ratings and operating conditions of each model.
TECHNICAL DRAWINGS
Drawings & diagrams
Open a figure to inspect the dimensions and configuration details.
Designed Around Your
Equipment Requirements
Electrical and Mechanical Compatibility
Confirm the circuit ratings, switch positions, mounting dimensions and terminal connections for your application.
OEM and Customization Support
Discuss your application, technical parameters and installation constraints with our team. Available options depend on the product platform, engineering feasibility and order requirements.
Industrial Switch
Applications
- Vehicle electrical systems
- OEM equipment assemblies
- Application-specific control circuits
Check the model drawings and terminal configuration against your equipment before integrating the switch.
OEM Industrial Switch
Sourcing
For equipment manufacturers, consistent specifications and reliable supply arrangements are important throughout the product lifecycle.
When evaluating a supplier, consider technical documentation, sample verification, production consistency, customization feasibility and long-term sourcing requirements.
FAQ
Frequently
Asked
Questions
Discuss your requirements
Send us your specifications, drawings or existing part number to discuss product suitability, customization feasibility and quotation requirements.
Request a quoteWhat should I check before selecting this switch?
Confirm the circuit ratings, switch positions, mounting dimensions and terminal connections for your application.
Can I request a customized contactor?
Customization depends on the model and technical requirements. Share your specifications or drawings so the feasibility of your requested configuration can be reviewed.
Can I request samples before bulk purchasing?
Sample availability, cost and lead time should be confirmed for the selected model before placing an order.
What information is needed for a quotation?
Provide the model number, required quantity, electrical specifications, intended application and any special technical or packaging requirements.